home *** CD-ROM | disk | FTP | other *** search
/ EnigmA Amiga Run 1995 November / EnigmA AMIGA RUN 02 (1995)(G.R. Edizioni)(IT)[!][issue 1995-11][Skylink CD].iso / earcd / docs / lwml9503.lzh / LIGHTWAVE-MAR95 / 000132_owner-lightwave-l _Mon Mar 6 16:20:40 1995.msg < prev    next >
Internet Message Format  |  1995-04-09  |  5KB

  1. Return-Path: <owner-lightwave-l>
  2. Received: by netcom18.netcom.com (8.6.10/Netcom)
  3.     id NAA09607; Mon, 6 Mar 1995 13:51:28 -0800
  4. Received: from seraph.uunet.ca by mail2.netcom.com (8.6.10/Netcom)
  5.     id HAA04451; Mon, 6 Mar 1995 07:28:36 -0800
  6. Received: from cognos by mail.uunet.ca with UUCP id <173358-4>; Mon, 6 Mar 1995 10:30:03 -0500
  7. Received: from pilot.cognos.com by cognos.COM (4.1/SMI-4.0)
  8.     id AA29180; Mon, 6 Mar 95 10:16:29 EST
  9. Received: by pilot.cognos.com (4.1/SMI-4.0)
  10.     id AA01968; Mon, 6 Mar 95 10:16:27 EST
  11. Date: Mon, 6 Mar 1995 10:16:25 -0500
  12. From: Kevin Currie <curriek@cognos.COM>
  13. Subject: Re: Emplant questions:
  14. To: AndySteph@aol.com
  15. Cc: lightwave-l@netcom.com
  16. In-Reply-To: <950304143825_39168258@aol.com>
  17. Message-Id: <Pine.3.89.9503061046.D1956-0100000@pilot>
  18. Mime-Version: 1.0
  19. Content-Type: TEXT/PLAIN; charset=US-ASCII
  20. Sender: owner-lightwave-l@netcom.com
  21. Precedence: bulk
  22.  
  23. On Sat, 4 Mar 1995 AndySteph@aol.com wrote:
  24.  
  25. > I'm on the verge of buying an Emplant board for Mac emulation (and eventually
  26. > 586 emulation). I just wanted to get some answers before I did.
  27.  
  28. > 2) Since the Emplant has a SCSI port can you use that as a port for Amiga
  29. > applications, like hooking up a CD-ROM drive, or is it just for Mac (Emplant)
  30. > use? In other words, can the Mac and Amiga share a CD-ROM drive?
  31.     Yes, they can share a CDROM drive.. not at the same time though.
  32.  
  33. > 3) Since the Emplant shares RAM with the Amiga, can it be configured to use
  34. > minumum RAM, or can it be shut down all together for full RAM use by the
  35. > Amiga when needed (playing back Lightwave anims on the switcher)?
  36.     It can be shutdown (or never started) and you can use your full RAM.
  37. When you start it you tell it how much RAM to use.  Note that the Emplant
  38. can only use the largest contiguous block of memory. I have 8MB on my Warp
  39. and 2MB on my motherboard as well as 2MB chip and can only use the 8MB.
  40.  
  41. > 4) I have a 4000 with a 1084S monitor. Is this okay to view the Mac screen or
  42. > do I need a graphics board and a different monitor?
  43.     You can run it fine on a 4000 in many modes.  I run it in Productivity
  44. 256 color mode on my 4000 with a 1950 monitor.  Strangely enough 256 colors
  45. seems faster in Emplant than on the WB.  I guess you won't be able to use
  46. a non-flickering mode on your 1084S though-- that will surely be very 
  47. annoying.
  48.  
  49. > 5) Does the Emplant use the parallel port on the Amiga for printing? I have a
  50. > Laserjet 4M so I can use either parallel or Mactalk port. The parallel would
  51. > be much quicker.
  52.     I believe with some sw called PowerPrint (or similar) you can 
  53. do this.  I have not printed anything yet from the Mac side.  The Mac port
  54. would definatly work though.
  55.  
  56. > 6) How about the serial port on the Amiga. Does the Emplant share that for
  57. > modem hook-up?
  58.     Yes, Emplant can share the port just fine.  If you want to use MacTCP
  59. though you'll have to use the Emplant serial port though as apparently MacTCP
  60. bangs the hardware and will not work on the Amiga serial port.
  61.  
  62. > 7) Will the 586 module allow the use of all three systems (Amiga, Mac and
  63. > IBM) or do you need to choose between either Mac or 586 emulation from the
  64. > board itself?
  65.     I'm not sure what you mean here... You will be able to run the IBM
  66. module at the same time as the Mac one though (as we've been told anyways).
  67. If you mean do you have to choose between getting the (unavailable) IBM
  68. module *OR* the Mac one-- you have no choice-- Emplant comes with the Mac
  69. Emulation-- it cannot be bought without it.
  70.  
  71. > 8) I've heard with a 4000/040 it's blazingly fast. Is this true? And with a
  72. > Warp board it is faster than any stock Mac (excluding Power PC)? Whats a true
  73. > unbiased report on the Emplants overall performance?
  74.     Seems pretty good to me on my Warp40/40.  I haven't used Macs too
  75. much though so I couldn't comment otherwise.
  76.  
  77. > and finally....
  78. > 9) With the 586 running on the Emplant, you could run Windows. Does this mean
  79. > you could have Lightwave for Windows render as well as Lightwave in the Amiga
  80. > and have a self contained two machine render farm? I know there is serious
  81. > problems with this theory I just need someone to set me straight.
  82.     In theory yes.  You probably wouldn't want to though as the emulation
  83. overhead would most certainly slow both renderings down quite a bit.  You'd
  84. be better off doing it all on the Amiga side with *NO* emulations (or 
  85. anything else) running.
  86.  
  87.  
  88. |    Think for yourself... then Decide...   |-----------------------------
  89. |     Ignorance breeds Arrogance...         |     curriek@cognos.com
  90. |    A4K/WE40/40/NetBSD/Emplant             |Silicon Valley NORTH, Canada